Non Permanent Floor Protection - A Product Guide

Non Permanent Floor Protection - A Product Guide

Your floors need particular protection when undergoing remodeling, throughout new development, moving heavy furniture or equipment, and for other events past day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can value thousands of dollars in replacement and repair costs. This article describes surface protection products for floors so that you could make knowledgeable choices on the perfect product to make use of for your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These include frequent adhesive films, rolled paper products and rolled textile protection. Protective materials purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to forty eight mils thick).

(2) Products by the sheet: These include corrugated plastic, masonite, and different rigid protection. Protective supplies purchased by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and normally come as four ft by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces however doesn't work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can often go away adhesive residue when removed. Widespread paper protection products include:

· A coated compressed paper board 38 mils thick that is breathable, water-resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that is cheap however doesn't afford any impact protection and might simply tear

· Scrim paper may incorporate coatings or reinforcements to make them waterproof as well as scrim threads to reinforce the paper and prevent tearing. These improved papers are longer lasting than regular Kraft paper or rosin paper however they are additionally too thin to offer much impact protection.

· Rosin paper is thicker than Kraft paper and could be very low cost. Rosin paper is recycled, felt paper that ranges from 9.zero to 11.5 mils thick. The large drawback of using Rosin paper is that it could cause a everlasting stain if the paper gets wet. Rosin paper may rip easily so it not usually beneficial for use

· Corrugated cardboard rolls or sheets will also be used to protect flooring. Corrugate provides impact protection nonetheless it is not coated with a water-resistant end and needs to be kept dry always in order that it doesn't disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films various from 2.0 up to 3.5 mils in thickness. They trap any moisture from escaping so that they should not be used on any floors which are curing. Two of the great benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films don't provide any impact protection and are normally rated for short time period use of 30 to 90 days only. Polyethylene films are designed for one-time use and don't use recycled supplies making them a poor selection in sustainable protection. Protection films are available in a variety of adhesion "tack". Hard surface protection films may have a decrease tack and coloration than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with a lot of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an precise sheet of thin wood. Each plywood and Masonite are sold in the usual measurement of four feet by eight ft and are more expensive per square foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/4 inch thick. Plywood is commonly 1/4 inch to three/4 inch thick. Each products provide impact protection on a wide range of floor types and provide adequate protection towards heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable however they're bulky to carry and store. These wood sheets needs to be used on high of a softer protection akin to a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they prevent wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not offer moisture protection and could be harder to cut to measurement than different protection types.