Temporary Floor Protection - A Product Guide

Temporary Floor Protection - A Product Guide

Your floors need particular protection when undergoing remodeling, during new building, moving heavy furniture or equipment, and for other events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can value thousands of dollars in replacement and repair costs. This article describes surface protection products for floors so as to make informed choices on the perfect product to use in your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These embody widespread adhesive films, rolled paper products and rolled textile protection. Protective materials purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to 48 mils thick).

(2) Products by the sheet: These include corrugated plastic, masonite, and different inflexible protection. Protective materials purchased by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and normally come as four ft by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces however does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable in order that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can often leave adhesive residue when removed. Common paper protection products embrace:

· A coated compressed paper board 38 mils thick that's breathable, water-resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that's inexpensive but does not afford any impact protection and may simply tear

· Scrim paper may incorporate coatings or reinforcements to make them water resistant as well as scrim threads to bolster the paper and prevent tearing. These improved papers are longer lasting than regular Kraft paper or rosin paper nonetheless they're additionally too thin to supply much impact protection.

· Rosin paper is thicker than Kraft paper and may be very low cost. Rosin paper is recycled, felt paper that ranges from 9.zero to 11.5 mils thick. The massive drawback of using Rosin paper is that it may cause a permanent stain if the paper gets wet. Rosin paper can also rip simply so it not usually advisable for use

· Corrugated cardboard rolls or sheets will also be used to protect flooring. Corrugate provides impact protection nevertheless it is not coated with a water-proof finish and needs to be kept dry at all times so that it doesn't disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.zero up to 3.5 mils in thickness. They trap any moisture from escaping so that they shouldn't be used on any floors which are curing. Two of the nice benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films do not offer any impact protection and are normally rated for short time period use of 30 to 90 days only. Polyethylene films are designed for one-time use and don't use recycled materials making them a poor selection in sustainable protection. Protection films are available in quite a lot of adhesion "tack". Hard surface protection films may have a lower tack and coloration than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with lots of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Each plywood and Masonite are sold in the usual size of four toes by eight ft and are more costly per square foot than paper or polyethylene products. Masonite is commonly 1/8 or 1/4 inch thick. Plywood is commonly 1/4 inch to 3/4 inch thick. Both products provide impact protection on a wide range of floor types and provide adequate protection against heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable however they're bulky to carry and store. These wood sheets ought to be used on top of a softer protection similar to a rolled textile as they simply scratch flooring. These sheets work well to protect carpet as they forestall wrinkles when rolling heavy loads over the carpet. Plywood and Masonite don't provide moisture protection and could be harder to cut to dimension than different protection types.