Momentary Floor Protection - A Product Guide

Momentary Floor Protection - A Product Guide

Your floors need special protection when undergoing remodeling, during new construction, moving heavy furniture or equipment, and for different events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can cost 1000's of dollars in replacement and repair costs. This article describes surface protection products for floors so that you could make knowledgeable choices on the very best product to make use of in your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These embrace common adhesive films, rolled paper products and rolled textile protection. Protective materials bought by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to 48 mils thick).

(2) Products by the sheet: These include corrugated plastic, masonite, and different inflexible protection. Protective materials bought by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and normally come as 4 ft by 8 feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but doesn't work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can often leave adhesive residue when removed. Common paper protection products embrace:

· A coated compressed paper board 38 mils thick that is breathable, water resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that is inexpensive however does not afford any impact protection and can easily tear

· Scrim paper may incorporate coatings or reinforcements to make them water-proof as well as scrim threads to reinforce the paper and forestall tearing. These improved papers are longer lasting than regular Kraft paper or rosin paper nonetheless they're also too thin to offer much impact protection.

· Rosin paper is thicker than Kraft paper and could be very low cost. Rosin paper is recycled, felt paper that ranges from 9.zero to 11.5 mils thick. The large drawback of using Rosin paper is that it might cause a permanent stain if the paper gets wet. Rosin paper can even rip easily so it not usually recommended to be used

· Corrugated cardboard rolls or sheets will also be used to protect flooring. Corrugate provides impact protection however it isn't coated with a waterproof end and needs to be kept dry always so that it doesn't disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.zero as much as 3.5 mils in thickness. They trap any moisture from escaping so that they should not be used on any floors that are curing. Two of the good benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films do not offer any impact protection and are usually rated for short term use of 30 to 90 days only. Polyethylene films are designed for one-time use and don't use recycled materials making them a poor choice in sustainable protection. Protection films are available in a wide range of adhesion "tack". Hard surface protection films could have a decrease tack and colour than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with a number of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an precise sheet of thin wood. Each plywood and Masonite are sold in the standard size of 4 feet by eight feet and are more costly per sq. foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/four inch thick. Plywood is commonly 1/4 inch to three/four inch thick. Each products provide impact protection on quite a lot of floor types and provide adequate protection towards heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable however they are bulky to carry and store. These wood sheets needs to be used on high of a softer protection reminiscent of a rolled textile as they simply scratch flooring. These sheets work well to protect carpet as they prevent wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not offer moisture protection and could be harder to chop to size than other protection types.

In the event you loved this information and you would like to receive more details regarding temporary carpet protection i implore you to visit our own web-page.